ENGINE POWER:

At flywheel 65 Hp

OPERATING WEIGHT:

With 6.00-16 front tyre, 14.9/13-28 rear

tyre, hydraulic lift with three point linkage

System cat 1-2 square type

Fender with flat top. 2070 kg

ENGINE:

FIAT 8035.05

4-Stroke diesel engine direct injection

Number of cylinders     : 3

Bore and stroke          : 104 x 115 mm

Piston displacement    : 2,931cc

Max torque at 1500 engine Rpm. (216 NM (22 Kg)

Distributor type Fuel injection pump

Dry-type cylinder liners

Cooling system           : Water

Three-row brass tube and copper fin radiator.

Force-feed lubrication system,

Distributor type injection pump with

Mechanical speed governor.

Oil-bath air cleaner with semi automatic

Type dust unloader pre cleaner

Vertical exhaust muffer.Hand and foot accelerator

CLUTCH:

Dual plate, dry-type with separate controls

(Pedal for transmission and hand lever for

PTO)

Diameter of plates : 11”

SPEED (km/h):

With 6.00-16 front tyre and 14.9/13-28 rear tyre

FORWARD

1st creeper* 0.9

2nd creeper* 1.4

3rd creeper* 2.1

4th creeper 2.8

1 st low 3.0

2 nd low 4.5

3 rd low 6.6

4 th low 8.6

1 st high 10.9

2 nd high 16.3

3 rd high 25.0

4 th high 35.0

Reverse

Creeper* 1.4

Low 4.3

High 15.6

*Optional

TRANSMISSION:

Gearbox: 8F +2R speeds

Gearbox with constant – mesh gears

Synchromesh on 3rd, 4th, 7th and 8th

Speed, Double control lever

Differential with mechanically operated

Look, spur gear final drivers.

BRAKES:

Service: disc type, Oil bath, mechanical control, simultaneous or

independent operation

Parking: dependent, operating on service Brakes, with hand

control lever and flashing warning light

FRONT AXLE:

Telescopic type, inverted U section

Variable tread with heavy-duty box section type front axle

support

STEERING:

Hydrostatic power steering

With independent circuit

Turning radius:

-with brakes          : 3.000mm

-without brakes     : 3.800mm

POWER TAKE OFF:

Fully independent:

1-3/8th 6 splineshaft, 540 rpm at 1970 Engine rpm

TYERS (Parkina Of Tyre ):

Front: 6.00-16

Rear   14.9/13-28

TREADS:

Front (5 Positions):

1,410-1,510-1,610-1,710-1,810mm

Rear (6 Positions):

1,400-1500-1600-1700-1800-1900mm

HYDRAULIC LIFT:

Lift-o-matic, automatic, with draf, poition and mixed control,

draft control through the top link, pump capacity 34.5 L/min.

(Max.) Relief

Valve opening pressure, 190 kg /cm2

Automatic lifting and lowering device.

Lowering Speed Adjustment and transport lock,

Lifting capacity. 2200 kg.

Auxiliary control valves (Single and double acting) with ½* quick

couplings.

*Optional

DIMENSIONS:

(WITH 6.00-16 AND 14.9/13-28 TYRES)

ELECTRICAL SYSTEM

Voltage               : 12V

Starting motor    : 4 HP

Altemater            : 400 W

Battery                : 110/120 Ah

Starter safety switch

Cold starting-aid device thermostat*

High-low beam headlights.

Parking, direction, stops lights.

Multiple gauge instruments panel

Rear floodlight

2-Ploe power connector*

*Optional

BODY:

With “Square” hood, fully forward tilting for max accessibility.

DRIVER SEAT:

Deluxe, with parallelogram suspension and hydraulic shock

absorber, adjustable to driver’s wight, reach and height

CAPACITIES:

Fuel Tank                          : 61.01

Engine Oil sump and filter : 7.311

Rear transmission and

Hydraulic lift                      : 30.11

GENERAL FEATURES:

• Efficient and automatic hydraulic system with latest technology of liftomatic

• Excellent Fuel consumption

• Heavy duty oil cooled disc brakes

• Adjustable and comfortable driver seat

• Hydrostatic power steering

• Tip up engine hood for maximum access to engine service points

• Heavy duty front axle support

• Advanc